Application fields of water chiller

Water chiller in the industry is divided into air-cooled chiller, and two kinds of water-cooled chiller, Water chillers on the temperature control is divided into low temperature chillers and chiller room temperature, room temperature control in the range of 0 degrees -35 degrees. Cryogenic temperature control is generally at 0 degrees - about 100 degrees below zero. Screw chiller with high efficiency, good performance, low noise, low vibration, high-energy, reliability, long life and other advantages. Screw chiller its key components - the use of screw compressors named screw chiller, refrigerant gas from the evaporator unit from out of state; after the compressor through adiabatic compressed into high temperature and pressure condition. Gas refrigerant is compressed, in the condenser, isobaric cooling condensation, condensed into a liquid refrigerant after the change, and then expanded to a low pressure through the throttle valve into the gas-liquid mixture. Air cooled water chiller, contains within its body holding tanks and pumps, cooling towers do not need to heat plus installation and move very convenient, but it requires a higher work environment, first of all, because it is hot air circulation for cooling . Therefore, if you install ventilation plant is not good, it will directly affect the air cooled water chiller cooling effect. in addition, if you want to have a clean room air cooled water chiller placed in humidity requirements, then I advise you to modify water-cooled. because air cooled water chiller, water vapor in the top spray with heat dissipation.

In many areas are likely to use the chiller, the main application areas are:
1.water chiller in supporting the vacuum device can be used. Such chillers are also in line with the demand for high-quality vacuum equipment, such as molecular pumps, small vacuum coating machines.
2.water chillers use in supporting medical laser equipment. Chiller water treatment such unique features, making it ideal for medical laser equipment for selecting supporting laboratory equipment. This series chiller is also widely used atomic absorption spectrometer, fermentation equipment, reactor, electrophoresis, etc.
3.Chiller during use must pay attention to: the tank should be added before the first use of a liquid medium, followed by the use of the power supply should be determined according to the machine model, the power supply should be greater than or equal to the total power equipment, power supply must have a good grounding, again chiller should be placed in dry and ventilated place, and to the side after being left obstacle 400mm distance, and finally used up the chiller, all switch set to off, took power plug with suction ball, hose the tank liquid dry.
4.water chiller can be used to support experimental refrigeration equipment. Such as a rotary evaporator, distiller, a condenser having a controlled low temperature, temperature stability, high condensing efficiency characteristics, can effectively improve the recovery rate. While its fluid purification, to avoid clogging the flow of the pipeline, the growth of microorganisms.
5.water chillers use in supporting the semiconductor laser device. Semiconductor laser device due to its special structure, high quality requirements.
www.digood.cn